Stay Safe When Traveling
Now that an increasing number of us are travelling for business and pleasure, it’s important we take precautions to protect ourselves, our families and other Australians.
We have seen how quickly an outbreak can occur so it's important to be prepared and travel safely in this environment.
According to official Australian government guidelines, three of the most important things we can do to stop the spread of coronavirus are to:
- Practise physical distancing
- Wear masks / respirators
- Observe good hygiene (including washing your hands and cleaning your surroundings)
Invest in a Travel Safe Pack and have one handy when traveling for your suitcase, handbag or glovebox.
Why choose AMD P2 - 4 Layer Respirators?
1. Certified P2 respirators, which is the Australian & NZ standard (equivalent to USA's N95).
2. Unique nano-filter which filters out 99.66% of airborne particles (includes viruses and bushfire smoke).
3. Wear continuously for up to 24 hours.
4. 4-layers for extra protection, yet light, comfortable and breathable.
5. 3-panel design with ear-loops and a metal strip within to mould around the nose for a better fit (can be worn with glasses).
6. First P2 respirators Made in Australia
7. Individually packaged for hygiene and folded flat for portability.
8. Filters ultra fine particles with a Bacterial Filtration efficiency of 99.83%)
VIEW ALL CERTIFICATIONS HERE
3 Travel Safe Packs for $99
SAVE $35 + Free Express Shipping
10 x AMD P2 Nano-tech Respirator masks
10 x Alcohol Surface Wipes
1 x 60 mL Hand Sanitiser
Face masks, such as a surgical or cloth masks, are simply a barrier to splashes, droplets and spittle and do not effectively filter small particles from the air. They are not designed to seal tight against the face. They limit the wearer from spreading disease, but do not protect them from breathing in other people’s germs.
P2 (N95 equivalent) respirators are designed to protect the wearer from breathing in airborne particles such as viruses and bacteria as well as preventing their own breath from affecting others. They are carefully crafted to seal around the face of the wearer. It should be noted that P2 respirators with the valve are designed for the protection of the wearer only, as the valve allows the breath to escape.
The AMD P2 (N95 equivalent) respirators at Aussie Pharma Direct utilise cutting-edge four layered nano-filters which provide up to 99.66% protection from airborne particulate matter and aerosols such as viruses, bacteria, smoke and dust, whilst allowing for excellent breathability and user comfort (TGA min for P2 requires a min of 94%). Most other masks and respirators on the market use meltblown filters which means they generally cannot be used longer than 1-3 hours as they lose their effectiveness to filter when becoming damp from breath. Whereas a P2 (N95 equivalent) respirator with a nano-filter can be worn for up to 24 hours and are not affected by moisture or dampness.
Scroll down for more information, customer reviews, certifications and how to purchase.
Nano-filter, filters 99.66% Airborne Particles
P2 / FFP2 NANO-TECH Particulate Respirator features advanced filtering and design details that allow them to be worn comfortably for extended periods of time while maintaining their class-leading functionality over standard melt blown filter respirators.
Cutting-edge nanofibre filters are incorporated into a face-contouring design that create an effective barrier against potentially harmful airborne particles and aerosols such as dust, virus, and bacteria. Nanofibre technology ensures excellent breathability and lightness even with the assurance of four protective layers.
Technology: Nano-filters, comprised of nano-fibres, deliver higher filtration efficiency than standard melt blown filters and are lighter and more breathable. They also maintain their functionality after exposure to moisture while typical filters lose their electrostatic properties once exposed to water. AMD’s nano-filters are water resistant and protective against airborne particles, aerosols, and liquid.
Fit: Innovative three panel design fits naturally around the nose and mouth creating a better seal and aesthetic. Elastic ear loops hold the respirator securely in place. A soft inner layer and moldable padded nose bridge wire provide extra comfort.
Comfort: Nano-filter respirators are lighter than standard respirators and allow enhanced breathability which allow them to be worn for hours. The three panel design unfolds to shape naturally around the face maximising ventilation around the nose and mouth while still maintaining an effective seal to the environment. Nano-filter respirators are potentially viable options for populations with breathing restrictions such as the elderly and those with heart and lung conditions.
Packaging: Each nano-filter respirator is individually packaged for hygiene and designed to fold flat to facilitate portability and storage. Individual wrapping makes it convenient to carry and distribute without contamination. 50/Box.
1. Before putting on the respirator, wash hands for at least 20 seconds with soap and water or rub hands together thoroughly with alcohol-based hand sanitiser.
2. Take care not to touch the inside layer of the respirator that will be in contact with the nose and mouth when unpacking and while donning.
3. Check for defects in the face respirator such as tears or broken loops.
Position the label side of the respirator outward and orient the respirator so that the foam nose bridge strip is at the top.
4. Unfold the respirator while holding onto the edges (again being careful not to touch the area that will be in contact with the nose and mouth). Position the unfolded respirator over the nose and mouth and place one ear loop over each ear.
5. Mould the nose bridge wire to the bridge of the nose and while pinching the nose bridge in place stretch the bottom of the respirator to over the chin. Press along the edges of the respirator to maximise the seal.
Avoid touching the respirator while using it; if touched, clean hands with alcohol-based hand sanitiser or soap and water.
Replace respirator if it becomes obviously contaminated; never reuse single-use respirators.
Removing the respirator: Wash hands with soap and water or alcohol-based hand sanitiser before removing the respirator. Remove the respirator by unhooking the ear loops, taking care not to touch the front of the respirator which might have become contaminated. Discard immediately in a closed bin and clean hands with alcohol-based hand sanitiser or soap and water.
Number per Box: 50
Packaging: Bulk Case
• Australian Made
• Cutting-edge nanofibre filters
• Four-layers with elastic ear loops
• Innovative three panel design improves fit and aesthetic and minimises gaps
• High breathability
• Soft, lightweight, comfortable & odourless
• Individually packed
• Shelf life of 3 years
• Latex free
Filter Included: Yes
Face seal/ Nose foam: Nose foam
Fluid Resistant (ASTM F1862): No
Flame Resistance (ASTM D2859-96): No
Flammability Rating: Class 1
Product Colour: White
Product Type: Dust and other Particles
Respirator Style: Flat Fold
Australia and New Zealand Compliance Standards: P2
Standards/Approvals: AS/NZS 1716:2012
Filter performance: ≥ 99.6%
Test agent: NaCl
Flow rate: 95 L/min
Total inward leakage (TIL): ≤ 8% leakage
Inhalation resistance: ≤ 70 Pa (at 30L/min)≤ 240 Pa (at 95L/min)
Flow rate Varied: – see above
Exhalation resistance: ≤ 120 Pa
Flow rate: 85L/min
Exhalation valve leakage requirement Leak rate: ≤ 30mL/min
Force applied: -250 Pa
CO2 clearance requirement: ≤ 1%
P2 - Australian Standard
Must filter min 94% Airborne Particles
N95 - USA Standard
Must filter min 95% Airborne Particles
KN95 - Chinese Standard
Must filter min 95% Airborne Particles
FFP2 - European Standard
Must filter min 94% Airborne Particles
What our Customers say
"Well made, good fit, comfortable and AUSTRALIAN MADE! Thank you for great service and follow up. I was pleased to choose you."
Susie, NSW - Oct 2020
"I have gone from using surgical masks to these P2 masks and wow what a difference. It's like going from wearing polyester to cotton! I have to wear for hours at a time and they are so much nicer to wear. Feels safe and secure too. Worth investing in if you need to wear for more than an hour.
Sarah, NSW - Nov 20
My staff love the masks. They feel they fit better and allow them to breathe with ease compared with surgical masks they have worn. I personally feel they are better than the previous N95 masks I was using. The fact they are made here too is the icing on the cake!!! Can I have 2 more boxes..."
Dr David M, NSW - Oct 2020
These disposables are a comfortable, nice light, easy to fit FFP2/P2 mask AND Aussie made too 👌 🇦🇺 #MaskupMelbourne"
Corrina VIC, Aug 2020
"These are fantastic masks. I received a box a couple of weeks ago and have given them out (they're individually wrapped) to a lot of people who find it difficult to breathe in other types. They all love them so far."
Simone, VIC Sep -2020
"Very happy customer. My order arrived quickly and I was pleased to see all the masks were individually packaged. Great to see an Aussie company selling Australian made PPE."
Nick, NSW - Sep 2020
"P2/FFP2 respirator masks are of the best quality I've ever purchased. Well fitted, comfortable, and value for money - totally recommended. Thank you Aussie Pharma Direct."
Cathy, NSW, Aug 2020
"They truly do have much better breathability and comfort than any other I have tried. Very grateful I had them, especially having to wear them over a 30 hour journey."
Natalie NSW, Aug 2020
This offer is for $25 off a box of AMD P2 Respirators should not to be used in conjunction with any other offer or discount code. Offer valid until 28 Feb 2021 or until stocks last.
This product is not intended to diagnose, treat, cure, or prevent any disease. Results may vary / results may not be typical / reviews or testimonials may be fictionalized. This information does not constitute medical advice and it should not be relied upon as such. Consult with your doctor before modifying your regular medical regime.This product hasn’t come to replace any medical advice or can’t guarantee any result.
Warning: Selection of the most appropriate Respiratory Protective Equipment (RPE) will depend on the particular situation and should be made only by a competent person knowledgeable of the actual working conditions and the limitations of the RPE. Details regarding performance and limitations are specified on the respirator packaging and user instructions. Before using any respirator, the wearer must read and understand the user instructions for the product. Use in accordance with AS/NZS 1716:2012 Standard. Misuse can result in sickness or death. For more information, consult a supervisor or contact an Occupational Hygienist and Safety professional.