Directions for Use

Allow the test to reach room temperature (15-30 °C) before testing. Wash your hands thoroughly.

Step 1: Collect Urine Sample

• Collect urine in a clean and dry container.

Step 2: Testing

• Remove the test panel from the sealed pouch and use it immediately.
• Remove the cap of the panel.
• Immerse the test panel vertically in the urine specimen for at least 10 to 15 seconds.
• Note: Immerse the dipstick panel to at least the level of the wavy lines, but not above the arrow on the test panel.
• Replace the cap and place the test panel on a non-absorbent flat surface.
• Start a timer

Step 3: Read Results

• Read the test results at 5 minutes, do not read results after 10 minutes.

How to Read Results

Negative Result
Two lines appear — one in the control region (C) and one in the test region (T).

Even a faint test line is considered negative.

Positive Result
One line appears in the control region (C) only.

No line appears in the test region (T), indicating the substance is present above the detection threshold.

Invalid Result
No control line appears.

This may indicate insufficient sample volume or incorrect testing procedure. Repeat the test using a new device.

Important Storage & Safety Information

• Store between 2°C and 30°C
• Do not use past the expiry date
• Keep cassette sealed until ready for use
• Avoid exposure to contaminants such as bleach or alum
• A positive result confirms drug presence but does not indicate intoxication levels
• A negative result does not guarantee drug-free urine
• This test does not differentiate between illicit drugs and prescribed medications