SAN-AIR™ Surface Mould Remover:

• Adjust the nozzle of SAN-AIR™ Surface Mould Remover to achieve a fine spray. This ensures even application on the surface you want to clean.
• Before proceeding, test the spray on a small, inconspicuous area of the surface you intend to clean. This step helps you gauge the product's compatibility with the material and allows you to observe the temporary change in surface colour, which is normal when wet.
• Spray surface mould remover evenly to coat the mould-infected area.
• Allow the spray to sit for 15 minutes. After the waiting period, use a clean, dry cloth to wipe off the mould. Ensure thorough cleaning, and do not reuse dirty cloths to prevent the spread of mould. For each wipe, use a clean area of the cloth until it is used up, then continue with a new clean cloth.
• If any mould residue remains, repeat the application and wiping process until all traces of mould have been completely removed from the surface.
• Give the cleaned surface a final spray with a fine mist of SAN-AIR™ Surface Mould Remover. Allow it to air dry naturally.

If using the SAN-AIR™ Portable Nano Atomizer:

1. Open the reservoir compartment of the atomizer. Carefully pour the SAN-AIR™ Surface Mould Remover into the reservoir. Be sure not to overfill.
2. Once the reservoir is filled, securely fasten the reservoir cap to prevent any spills or leaks during operation.
3. Turn on the SAN-AIR™ Portable Nano Atomizer using the power button.
4. Hold the atomizer and direct the mist towards the areas you wish to spray. Move the device methodically, ensuring even coverage across surfaces.

Got more questions? Click here to read our SAN-AIR full frequently asked question list.